TOP Server Schneider Modicon Modbus Suite Supported Devices

More Than Schneider/Modicon PLCs - Connect 1000’s of Modbus Devices

Devices Supported (By Driver) - Don't See Your Device Listed? Contact Us

The below table is meant to provide a high-level overview of the device types and families of devices supported by the Modbus Suite - it is not an all-inclusive list of every model due to the sheer volume of device manufacturers that have implemented Modbus for communications in their hardware. In general, if your device says it supports Modbus, the Modbus Suite should be able to get you connected.

We always recommend taking advantage of the TOP Server Free Trial to get connected to your controllers prior to purchase to ensure your needs will be met.

Modbus TCP Ethernet

Modbus RTU Serial

Modbus RTU Server Serial Modbus ASCI Serial

Modbus Plus

Modbus TCP Compliant PLCs

Modbus RTU Compliant PLCs

Any Modbus RTP Client device or software - this driver makes your OPC server look like the memory space of a Modbus Device Modbus ASCII Compliant PLCs

Modbus Plus Compliant PLCs

Devices supporting Modbus TCP

Devices supporting Modbus RTU or JBus RTU Modbus RTU Client Compliant PLCs Devices supporting Modbus ASCII Devices supporting Modbus Plus

Instromet Devices

Elliott Flow Computers Devices supporting Modbus RTU or JBus RTU configured as Modbus Clients Flow Computers PCs Configured for Modbus Plus Communications

Fluenta FGM 100/130 Flow Computers

Partlow Temperature and Chart Recorders Modbus RTU Serial Client Applications (including HMIs, SCADAs, other OPC Servers support Modbus RTU, etc.) Flow Automation Devices


Roxar FRM Water Cut Meters

Omni Flow Computers (including string access) DCS Systems (Acting as Modbus Clients)  

Modicon x84 Controllers

Applicom Compatible for Generic Modbus, TSX Premium and TSX Quantum Magnetek GPD515 Drives     Modicon TIO Remote I/O Modules
Modbus TCP Clients (this driver can be configured as a Modbus TCP Unsolicited Server) Daniel S500 Flow Computers     AT-984 PCBs
Modbus TCP to Modbus Plus Bridge/Gateway Dynamic Fluid Meter (DFM) SFC3    


Modbus TCP to Modbus Serial protocols using Device Gateways/Terminal Server/Ethernet-serial convertors TSXCUSBMBP USB Adapter V1.x Only    



Important Notes:

  • The TOP Server Modbus Ethernet Driver specifies specifies all Device IDs in the format where is the IP Address of the device and y is the Node ID. Most Modbus TCP devices require a Node ID of 0; however, certain manufacturers allow the user to define a non-zero Node ID.
    • Additionally, the Node ID is used when communicating through a Modbus TCP to RTU Serial or Plus Gateway - specify the IP Address of the gateway followed by the Node ID of the target RTU Serial or Plus device.
    • When using the Modbus Ethernet driver in Server/Unsolicited Mode, the Device ID will be the IP Address of the local PC or the loopback address ( followed by the desired/required Node ID.
  • The TOP Server Modbus Plus driver is only supported on 32-bit Windows operating systems.

Get Started Now

The demo is the full product once licensed. Once a client application connects to the  TOP Server, the TOP Server runtime will operate for 2 hours at a time. At the end of the 2 hour demo period, the demo timer must be reset by restarting the TOP Server runtime service.

Connect with Us

1-888-665-3678 (US + Canada toll free)
+1-704-849-2773 (Global)